
“Can domestic pulp replace imported pulp?” is the wrong question, and it has been for a while. The useful question is: on your line, for your product, at your cost structure, which property matters most — and where does domestic pulp win, and where does it have to give ground?
From “can it work” to “where is it stronger”
For several years the domestic fluff pulp story has been framed as substitution. Anyone who has actually completed a switch knows it is not a switch at all, but a set of trade-offs: brightness may be slightly lower, bulk may be slightly higher, lead time is far shorter, batch responsiveness is far faster.
Break the comparison down to the property level and the decision becomes much clearer. The table below puts the six most frequently compared properties side by side. Note that the “imported typical range” refers to common bleached softwood fluff pulp on the market — brands differ substantially, and the supplier’s own TDS always governs. The table gives you the order of magnitude, not the verdict.
| Property | Imported typical range | Hongbo typical range | Main effect on the finished product |
|---|---|---|---|
| Brightness %ISO | 86 – 90 | 80 – 88 (bleached grades) | Core whiteness, premium visual impression |
| Freeness CSF mL | 350 – 600 | 300 – 550 | Fluffing energy, fiber integrity, dust |
| Bulk cm³/g | 13 – 17 | 12 – 16 | Core height, SAP carrying, dry feel |
| Absorbency g/g | 9 – 13 | 8 – 12 | Acquisition speed, retention |
| Mean fiber length mm | 2.2 – 2.8 | 2.0 – 2.6 (softwood grades) | Core integrity, compression resistance, rewet |
| Moisture % | ≤10 | ≤10 | Static, caking, storage stability |
Reading the table carefully reveals something important: the two ranges overlap heavily. The difference sits at the edges of the window, not in an overall ranking. For the vast majority of mainstream products, domestic pulp lands comfortably inside the usable range. The real differences appear in edge cases and in stability.
Brightness and cleanliness: more than colour
Brightness is the most visible property and the most easily over-weighted. A range of 80–88 %ISO is more than enough for most baby diapers and sanitary napkins — what the consumer sees is the overall whiteness of the core, which also depends on the nonwoven, the SAP and the adhesive colour. Pulp brightness alone does not decide the impression.
Cleanliness does. Shives, specks and unbleached fragments make a core look dirty even when the brightness number is high. You cannot judge this from a TDS figure; you judge it from sample testing and from visual inspection after the trial. That is why we ask customers to include an impurity screen at the sample stage.
Freeness and fluffing energy: the hidden efficiency variable
Freeness (CSF) measures how fast the fiber drains. In fluff pulp terms it correlates strongly with how easily the sheet defibrates. Higher freeness generally means easier fluffing and faster loft development, but possibly reduced fiber integrity and more dust. Lower freeness demands more refining energy, keeps the fiber longer and more intact, and builds a stronger core.
This is why the 300–550 mL window looks wide — it is not indifference, it is adjustment room for different lines. High-speed, high-capacity lines are more sensitive to dust and tend toward the higher end; products that live or die on core integrity accept the energy cost of the lower end.
- Dust-sensitive lines: favor higher freeness with strong cleanliness
- Strength-sensitive products: favor long-fiber softwood at lower freeness
- Cost-sensitive volume lines: a softwood/hardwood blend at mid freeness is usually the optimum
Bulk and absorbency: the two supports of core design
Bulk decides how much volume a gram of pulp can hold open. With thin-core designs everywhere, many converters want higher bulk so less weight can build the same core height. Push bulk too far, however, and the core collapses under pressure — rewet gets worse, not better.
Absorbency has to be read together with SAP. The fiber acquires and distributes liquid; the SAP locks it away. A pulp with moderate absorbency but excellent distribution can outperform a high-absorbency grade that cannot move liquid. That is why selecting on the absorbency number alone is a reliable way to get it wrong — it measures only half the system.

Supply chain dimensions: lead time, batch consistency, responsiveness
Beyond the properties, three factors never appear on a TDS but carry high weight in real production:
- Lead time: local supply usually means shorter cycles and smaller minimum commitments — critical for multi-product, small-batch lines
- Batch consistency: imported pulp is exposed to shipping schedules and inventory levels, so batches can vary; local supply allows lot-level traceability and fast adjustment
- Responsiveness: whether someone can be on your line the same day decides how long a stoppage lasts
None of this appears in a datasheet, but all of it appears in your cost sheet. Converters who have completed a full switch usually find the supply-chain saving larger than the per-tonne price difference.
When imported pulp is still the right choice
Claiming domestic pulp wins across the board would be dishonest. In several situations imported grades remain the safer choice: the formulation is locked by an end customer or certification scheme; a specific grade carries years of validation data and is extremely expensive to replace; or an unusually narrow brightness and freeness window is required and no domestic equivalent exists yet.
An honest supplier tells you where those boundaries are. That is also why we ask customers to define, at the selection stage, which properties they can compromise on and which they cannot — clear boundaries save trial capacity on both sides.
We do not ask customers to switch for the sake of buying domestic. There is only one good reason to switch: on the one or two properties you care about most, we can offer a better combination.
How to decide: rank the six core properties by their impact on your finished product, then see where domestic and imported pulp land. If domestic pulp does not lose ground on the two properties you care about most, the switch is worth doing. If it happens to land exactly on the other side’s strength, negotiate a custom grade instead of forcing a swap.
About Hongbo Pulp
Shandong Hongbo Pulp & Paper Co., Ltd. focuses on fluff pulp across seven fiber families — bleached, natural, bamboo, pure softwood, softwood/hardwood blend, poplar/pine CMP and reed pulp — supplied in unprocessed, semi-processed and fully processed grades. A dedicated research team and field application engineers support more than 200 hygiene manufacturers from fiber selection and on-line trials through to volume supply.
Media & Sales Contact
Mr. Yang · Tel/WeChat +86 134 7575 9568 · yang@hongbopulp.com. For TDS, samples or on-line trial support, submit a request through the contact page — we reply within one business day.