
Adult incontinence products carry more liquid, for longer, on users who often cannot reposition themselves. Wet integrity is not a nice-to-have here; it is the product.
Application Overview
Adult care spans a wide range: light liners, pull-up pants, taped briefs and heavy overnight products. What they share is a higher liquid load per use and longer wear time than baby diapers, which puts sustained structural demand on the core.
Fluff pulp in this segment has to do more than absorb. It has to keep the core from collapsing under body weight, keep SAP distributed when the product is saturated, and maintain a dry surface against skin that may already be compromised.
Getting this right is mostly a matter of fiber length and bulk — the two properties that determine whether a saturated core still has structure.
Product Formats We Support
Light Liners
Thin, discreet protection with fast absorption
Pull-Up Pants
Cores that hold shape through repeated movement
Taped Briefs
High-capacity cores with secure fit and containment
Overnight Products
Maximum capacity with wet integrity through extended wear
Bariatric Sizes
Larger cores requiring uniform formation across a wide width
Institutional Packs
Cost-controlled formats for care facilities
Typical Requirements and Our Approach
| Requirement | Typical Target | How We Meet It |
|---|---|---|
| Capacity under load | 6–10× the light-flow equivalent | High-bulk long-fiber cores with tuned SAP distribution |
| Wet integrity | No core break-up when saturated | Long fiber network maintains tensile strength wet |
| Thickness retention | ≥ 85% after packaging compression | Low fines content resists irreversible compaction |
| Surface dryness | Low rewet at sustained pressure | Open pore structure maintained under load |
| Odor control | Reduced ammonia perception | Low extractables and consistent moisture; optional blend support |
| Cost per unit | Segment-specific target | Blend ratio tuned to the actual capacity requirement |
Targets vary by product class and market. We will specify against your product’s actual load profile.
Detailed Description
Why wet integrity is the binding constraint
In a baby diaper, the product is changed frequently and the load per use is moderate. In adult care, the product may carry liquid for many hours under body weight. A fiber network that loses strength when wet will let the core break apart, and once the core breaks, SAP clusters and the product fails locally even if total capacity is still available.
Long-fiber softwood maintains wet tensile strength far better than short-fiber or high-lignin alternatives. This is the single most important reason not to push CMP content too high in this segment.
Blending for cost without losing structure
Adult care is cost-sensitive, and blends are common. The safe pattern is to keep softwood as the structural majority and use hardwood or CMP to take cost out of the non-critical layers, rather than across the whole core. Blends above 40% short fiber in a heavy-load product usually show up as complaints about leakage at night.
Test wet integrity by saturating a finished product and lifting it by one end. If the core shifts or breaks, the fiber specification is wrong regardless of what the absorption data says.
Skin contact considerations
Prolonged contact with wet material and compromised skin means surface dryness matters more than in baby care. That is a design outcome — fiber bulk, SAP distribution and acquisition layer — rather than a single fiber property, but the fiber sets the ceiling on what the design can achieve.


